Using X Max and Y Max

You may control the maximum subsection size of individual polygons by using the X Max and Y Max parameters. For example, if X Max and Y Max are decreased to 1, then all subsections will be one cell. This results in a much larger number of subsections and a very large matrix which are the cause of increased analysis time. Thus, this should be done only on small circuits where extremely high accuracy is required or you need a really smooth current density plot.

NOTE: If the maximum subsection size specified by X Max or Y Max is larger than the size calculated by the Max. Subsection Size parameter, the Max. Subsection Size parameter takes priority. The Max. Subsection Size is discussed in Setting the Maximum Subsection Size Parameter.