Models => Inductor  => Create View

Cadence Virtuoso Interface - Models Menu - Inductor

Create Spectre Inductor Model View dialog box

To create a Inductor model, select Models => Inductor => Create View from the main menu of the Cadence Virtuoso Interface window. This command opens the Create Inductor Model View dialog box. Note that this command is only enabled if simulation data is available for the present settings and an Inductor  Model view does not presently exist.

Inductor (IME) File in Spectre Format: This specifies the input data file used to create the model. The default location for your SonnetEM View is displayed. If you wish to change the input data file, you may directly edit this entry or click on the Browse button to open a browse window and select another data file.

Model Name: Select the desired model name from the drop list.

Symbol Settings: The present Symbol Settings are displayed. To change these settings, click on the Symbol Options button to open the  Model Symbol Options dialog box. Note that making changes may require a resimulation to generate model data that reflects those changes.

Sonnet Project File: Clicking on the Project Options button opens the Advanced Project Options dialog box which allows you to specify advanced run options you wish to apply to the analysis data being used to create the model. The Sonnet project name is displayed but may not be changed.

Ports: The pin list for the model is displayed here. To change these settings, click on the Ports button to open the Ports dialog box which allows you to edit the Ports parameters. Note that making changes may require a resimulation to generate model data that reflects those changes.